RhinoMoto 3/4 inch Bar End Extenders, Pair This pair of bar end extenders allows you to easily mount bar end mirrors, or shift your controls outboard to allow easier mounting of GPS, Smartphone, or USB Power Outlets.
Availability: 1 In stock -- Ready to Ship Now!
RhinoMoto 3/4 inch Bar End Extenders, Pair
Complete fitment list at bottom of this page.
This pair of bar end extenders allows you to easily mount bar end mirrors (CRG Lanesplit, CRG Arrow and others), or shift your controls outboard to allow easier mounting of GPS, Smartphone, or USB Power Outlets.
As electronics have become more and more prevalent on modern bikes, the handlebar has gotten increasingly crowded, so much so that there is very little room for traditional clamp-on accessories to be installed. These handlebar extenders get you 3/4 inch more space on each side of the handlebar to make installing clamp-on accessories possible.
Each bar end extender has an M6 allen key recess which makes tightening these thread-in bar extenders more secure than almost every other option on the market.
In addition the bar end extenders are hollow through the middle with M6 threads that allow re-installation of the stock bar end*, or easy and secure installation of aftermarket bar ends, or bar end caps.
Use of medium strength threadlock compound is required with this product.
Complete fitment list at bottom of this page.
*Stock Bar ends cannot be re-installed on RSV4 models. We recommend the Tuono V4 bar ends with Tuono V4 bar end bolts or Rizoma MA534 Bar Ends.
**Please note: If shifting controls outboard, it will be necessary to re-drill the locator holes for the switchgroup alignment pins. The LSL Drill Guide makes this very easy to do.
***V100 owners please note: Becuase your stock bar adapter end is already counterbored, this extension is only good for 12mm of additional bar length, not the advertised 20mm.
*Please note: On some models (especially the Moto Guzzi V7 and V9) it may be necessary to also purchase an M6 Shim Washer to prevent the throttle from binding on the bar end. Kind of goes without saying, but check that your throttle action remains smooth on opening and closing at all steering positions once these bar ends are installed.