OEM Aprilia RH Rearset, No Muffler Hanger - 2B0056589 For RSV4 *See detailed fitment list*
OEM Aprilia RH Rearset, No Pipe Hanger - 2B0056589
Complete fitment list at bottom of this page
This rearset is stock on the '19-'20 RSV4 1100 Factory. It can be a desirable part to have to give your bike a more compact appearance if a slip on or full system has been fitted that uses the subframe bracket instead of the rearset to support the muffler.
*This rearset could also be installed on Tuono V4 but the included footpeg is the narrower RSV4 type so would not be cosmetically correct.
‡Important Note: The bolts that secure the rearsets and passenger peg brackets to the frame are coated with a tremendous amount of medium strength threadlock compound by Aprilia. When removing rearset or passenger peg brackets take extreme care and exercise maximum patience when removing these bolts or this can happen (photo link). The best way to avoid stripped or broken rearset bolts is to loosen the bolt by hand until you feel binding and then retighten. Loosen again until binding (bolt will unthread a little futher every time) then retighten. Repeat this process (you will have to take breaks to let the bolt cool) until the bolt comes out.