Currency Estimator

Updated: June 04, 2020
Aprilia Energica Moto Guzzi Norton Piaggio SWM Motorcycles URAL Vespa Zero

Mailing List Signup

Aprilia Race ECU [MY2017] -#CM281707 *RSV4* (CM281707)

Aprilia Race ECU [MY2017] -#CM281707 *RSV4*

Aprilia Accessory "Race" ECU


  • '17-'20 RSV4 RR
  • '17-'18 RSV4 RF
Not for '19-'20 RSV4 1100 Factory. That model uses Race ECU CM281721 instead.

When you order this official Aprilia ECU, AF1 Racing selects the newest, and best available RACE map for your V4 . This ECU is "unlocked" and can be updated to newer RACE maps by your dealer (if newer maps become available).

This ECU is pre-programmed with the official Aprilia the RACE map for use with aftermarket full system or slip-on exhausts.

Traction control and power per gyro angle settings on this ecu are more conservative (oriented towards spirited riding) than those used on the Aprilia Corse ecu (oriented towards competitive on track racing).

AF1 Racing strongly recommends purchasing this RACE ECU in if you have installed an exhaust system with no catalytic converter or a removable dBkiller. When using exhaust systems without catalytic converter but with the dB-killer installed (such as when riding on circuits with noise restrictions), using the RACE ECU is still recommended.

The ECU is loaded with the three maps R, S and T, all of which full power maps. 

This ECU is compatible with the V4-MP / V4 AMP accessory ECU.

*Please Note: You will still need to visit your local Dealer to have throttle and handle learning procedures performed (ride-by-wire calibration) with the dealer diagnostic computer.  You bike will be inoperable with this ECU until this is done.  A DIY option for the advanced user is to use the GuzziDIAG software.  GuzziDIAG/IAWDIAG is not supported by AF1 Racing.

**Please note: If you are buying this 2017-2019 RACE ecu outside of the USA or Canada, a dealer visit may be required.  We are unsure how the ABS units are programmed outside of the USA and Canada.  The ABS unit you already have and this new ECU must match units (mph or kph). 

If they do not match, you will not have cruise control, and some other basic features until a dealer can properly configure the mph/kph setting in this new ECU.  We are setting them all to MPH as that works perfectly for USA and Canadian bikes.   USA and Canadian customers will have their ECU fully setup for easy DIY install with GuzziDIAG

Not USA Emissions/DOT legal. For Closed Circuit Use Only. 

This is an electrical part. All electronic parts sales are final. Electronic parts are non-refundable, non-returnable.




Live Stock Status:
Typically a 5-7 Business Day Lead Time

Backorders will be Notified after Ordering

For critical timelines please email before ordering

Product Inquiry

People that purchase this product also purchased :

Aprilia Race ECU -#CM281708 ['17-'20 Tuono V4's]
Aprilia Accessory "Race" ECU  For '17-'20 Tuono V4 1100 Factory, and '17-'20 Tuono V4 1100 RR ECU pre-loaded with mapping for aftermarket pipes.
Akrapovic Carbon Racing Slip-On
Akrapovic Carbon Racing Slip-On Exhaust System  For '17-'20 RSV4 (all variants), '19-20 RSV4 1100 Factory, and '17-'20 Tuono V4 1100 (all variants) Does not include unlock codes.
AF1 Racing Lowering Link For V4 - 40mm
AF1 Racing Lowering Link For '09-'16 RSV4 (all variants), '17-'20 RSV4 RR, '11-'15 Tuono V4 (all variants), '16-'20 Tuono V4 1100 (all variants). Can also be fitted to '17-'18 RSV4 RF* and '19-'20 RSV4 1100 Factory*

Copyright 2020  AF1 Racing