SC Project CR-T "LOW" Titanium Slip-On [Open Exit Version] For '17 Spec RSV4, '17 Spec Tuono V4 *See detailed fitment list*
SC Project CR-T "LOW" Titanium Slip-On MV-A18-LT36T (AKA MV-A16-L36T)
Complete fitment list at bottom of this page.
Open Exit Version
Full titanium silencer with CNC-machined pipes in titanium Conical link pipe has 60mm outlet (exhaust canister has 60mm inlet and 70mm outlet.)
Everything to install the exhaust on the bike is included: 1 silencer, 1 link pipe, springs and screws, high temperature stickers
RACE ecu, Race Mapping, or OFT Tablet is mandatory with this product.
This system does not have a removable baffle.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
*Does not fit with Akrapovic headers. Works with Stock headers only.
**Please note: The rearset tab on some pipes will be slightly out of alignment. This is normal. Tighten the through-bolt until the nut is securely attached on the back side, and apply Medium Strength Threadlock Compound. See photo below for illustration of normal mis-alignment.
*A note about SC Project Part Numbers: They have almost no bearing on what the contents of the box will be. We have received exhausts with open exits where mesh exits are specified, we have received A23A systems (allegedly for RS only) in A23B (allegedly for Tuono only) boxes. We have recieved systems without passenger peg brackets that are advertised as including passenger peg brackets. We have received open exit mufflers with stainless headers (a combination not offered by SC Project and which we did not order). Long story short, you will see a difference between part numbers listed on the SC Project website and our site, but rest assured, every single SC Project we receive is audited to make sure it is exactly as advertised.
SC Project products will not be shipped outside North American territories.