Agostini Rearset Kit, Black Anodized, For V7 Racer II. Can also be fitted to V7 Stone II, and V7 Special II. BUT aftermarket exhausts without heat shields must be fitted.
Agostini Rearset Kit, Black Anodized
For V7 Racer II.
*Can also be fitted to V7 Stone II, and V7 Special II. BUT aftermarket exhausts without heat shields must be fitted. 2B001009 Gear Shift Pedal Layshaft is also required, but not included. (see images below)
This Italian made rearset kit features the same peg position as found stock on the '11-'15 V7 Racer rearsets, but is anodized and offers 1 inch of peg height/depth adjustment thanks to a slotted mounting hole.
Installation instructions are not provided, but the rearsets install in the same manner as stock. Detail photos below should provide additional installation assistance.
Matching Black Anodized Passenger Pegs From Agostini are available separately.
Use of Medium Strength Threadlock Compound is mandatory.
Please note that the installation of this rearset kit requires replacement of the shift pedal layshaft (sold separately), seen in the center of the photo below.
*Please note: Rear Brake Pedal Pushrod Adjustmet should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values).
Does not fit V7 III's: Rear brake master cylidner is different, rear brake line is different, rearset bolt position is different, et cetera.