GiaMoto 2017-2019 Superpole Rearsets, Red (GiamotoSPRed-RFR-GP-No-FRT)
GiaMoto 2017-2019 Superpole Rearsets, Red
Complete LH and RH rearset kit with pedals.
- Non-Folding Road Round Footpegs
- No Comfort Kit
- Folding Red Toe Pieces
Designed specifically for the '17-'19 RSV4 (all variants) and '17-'19 Tuono V4 1100 (all variants), these are the best, direct fit V4 rearsets money can buy.
These billet aluminum rearsets are machined from 6082T6 solid bar and plate and designed specifically for the 2017-2019 RSV4/Tuono V4
With redesigned exhaust and ancillary mount points this rearset kit includes a removable exhaust mounting plate. This allows owners running full systems and short or CRT slip-ons to remove the large exhaust bracket if not required.
This Superpole Edition rearset comes with upgraded peg carrier fasteners, and folding toe pegs.
Footpegs are 6 way adjustable in 15mm increments fore and aft and up and down. When adjusted to their lowest position, the pegs are approximately 5mm lower than the stock peg on a RSV4. When fitted to a Tuono, the lowest position is the same as the stock footpeg.
The gear pedal runs on top quality dual INA bearings with zero end play giving a firm smooth shift. The gear pedal tip has an eccentric adjustable end.
The brake lever can be rotated 360° in 4 positions and is also movable fore and aft via a retaining slot in the pedal. The brake side has a billet bracket for the brake light sensor switch, which is crucial to avoid dashboard errors, and loss of rider aid functionality.
The footpegs have a knurled surface, grippy in dry and wet conditions. Folding pegs are available separately in both Track Tapered Bottom and Road Round configurations.
Uniquely, the kit is held together with grade 5 titanium fasteners.
Installation instructions in .pdf format.