Sato Racing Rearsets w/Muffler Hanger, GP Shift Pattern For RSV4, Tuono V4 *See detailed fitment list*
- *
Sato Racing Rearsets w/Muffler Hanger
GP Shift Pattern
Complete fitment list at bottom of this page.
Shift and brake pedals feature double stainless bearings for smooth, precise pedal operation. Deeply knurled footpegs provide optimal grip even in wet conditions. Choose from 5 adjustable positions in a range that puts your feet higher and further back compared to stock.
Footpeg POSITIONS
1 | 20mm Back | 15mm Up |
2 | 20mm Back | 25mm Up |
3 | 20mm Back | 35mm Up |
4 | 30mm Back | 25mm Up |
5 | 30mm Back | 35mm Up |
*Please note: all measurements are in relation to stock position (0 mm).
Need Sato Spare parts? See this page: Sato Racing Spare Parts and then send us an email with the part numbers you require and we'll get you a price and availability quote.
*Please note: Rear Brake Pedal Pushrod Adjustment should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values).
‡Important Note: The bolts that secure the rearsets and passenger peg brackets to the frame are coated with a tremendous amount of medium strength threadlock compound by Aprilia. When removing rearset or passenger peg brackets take extreme care and exercise maximum patience when removing these bolts or this can happen (photo link). The best way to avoid stripped or broken rearset bolts is to loosen the bolt by hand until you feel binding and then retighten. Loosen again until binding (bolt will unthread a little futher every time) then retighten. Repeat this process (you will have to take breaks to let the bolt cool) until the bolt comes out.