Ilmberger Carbon Fiber Lower Fairing For Tuono V4 (VEU.001.TUV4S.K)
Ilmberger Carbon Fiber Lower Fairing Kit
- '11-'15 Tuono V4
- '16 Tuono V4 1100 (all variants)
100% carbon Fiber, gloss finished and fitted with a lower heat shield. Includes carbon fiber filler panel winglets (see bottom of this page) to give a more complete looking installation.
Made in Germany and TUV certified. Very high quality. Ilmberger was the OEM supplier of carbon fiber to Aprilia during the years the limited edition RSVR Nera was produced.
Kit comes un-assembled. Youtube installation video (based on the plastic fairing) here. Bracket locations can be found on page 17 of the 2016 RSV4 RF Parts Diagram from which this kit is derived.
Kit requires you to reuse some of the button head bolts from your stock Tuono V4 lower fairing and all of the bolt clips.
***Please note: Extreme care must be taken during installation to ensure no part of the exhaust comes in contact with the fairing. Correct bracket installation and fastener torque (as detailed in the factory service manual) is critical. AF1 Racing is not responsible for damage to the Ilmberger Lower Fairing due to faulty installation.
*Decals visible in photos are NOT included.
**We recommend installation only by users who have previously worked with and/r installed carbon fiber or fiberglass race bodywork. Due to production variances common with handmade parts, some end user massaging may be necessary to achieve a good fit. See photo series at the bottom of this page for sample installation notes.
****Does not fit '17-'19 Tuono V4. The header/collector routing is different.
- - -
- - - - -