GiaMoto '11-'16 RSV4 Rearsets

Previous productGamma Zinken Gear Shift Ped...

Next productGiamoto Footpeg Extender Ki...

GiaMoto 2017-2019 Rearsets, Black and Silver, or All Silver. Designed to fit specifically on the '11-'16 RSV4 (all variants) and '11-'16 Tuono V4 (all variants), these are the best, direct fit V4 rearsets money can buy.

Availability: Expected to arrive at our warehouse in late May if ordered today

SKU: GiaMotoBlack-11-16

GiaMoto Foot Peg Type *
GiaMoto Rider Comfort Kit *
GiaMoto Gearshift Type *
GiaMoto Rearset Color *

$609.99 (USD)

Qty:

GiaMoto 2011-2016 Superpole Rearsets,

Available black and silver (as in the photos) or all silver.

Complete LH and RH rearset kit with pedals.

Designed specifically for models listed below these are the best, direct fit V4 rearsets money can buy:

'11-'16 RSV4 (all variants)
'11-'16 Tuono V4 (all variants)

These billet aluminum rearsets are machined from 6082T6 solid bar and plate and designed specifically for the 2011-2016 RSV4/Tuono V4

With redesigned exhaust and ancillary mount points this rearset kit includes a removable exhaust mounting plate. This allows owners running full systems and short or CRT slip-ons to remove the large exhaust bracket if not required.

Please note: Unlike the Giamoto Superpole rearsets, this rearset comes with NON-folding toe pegs.

GP shift is available as an option.

Footpegs are 6 way adjustable in 15mm increments fore and aft and up and down. When adjusted to their lowest position, the pegs are approximately 5mm lower than the stock peg on an RSV4. When fitted to a Tuono, the lowest position is the same as the stock footpeg.

If you select the "Rider Comfort Kit" option, you get peg carriers that are 15mm lower and pegs that are 15mm longer.

The gearlever runs on top quality dual INA bearings with zero end play giving a firm smooth shift. The gearlever tip has an eccentric adjustable end

The brake lever can be rotated 360° in 4 positions and is also movable fore and aft via a retaining slot in the pedal. The brake side has a billet bracket for the brakelight sensor switch, which is crucial to avoid dashboard errors, and loss of rider aid functionality.

The footpegs have a knurled surface, grippy in dry and wet conditions. Folding pegs are available separately in both Track Tapered Bottom and Road Round configurations.

Uniquely, the kit is held together with grade 5 titanium fasteners.

Installation instructions in .pdf format.

*Please note: Due to the multi-configuration design of this rearset kit, 4-6 weeks for delivery can be required.

‡Important Note: The bolts that secure the rearsets and passenger peg brackets to the frame are coated with a tremendous amount of medium strength threadlock compound by Aprilia. When removing rearset or passenger peg brackets take extreme care and exercise maximum patience when removing these bolts or this can happen (photo link). The best way to avoid stripped or broken rearset bolts is to loosen the bolt by hand until you feel binding and then retighten. Loosen again until binding (bolt will unthread a little futher every time) then retighten. Repeat this process (you will have to take breaks to let the bolt cool) until the bolt comes out.