These adjustable on-the-fly levers have six lever positions to allow you to tailor the lever throw to your preferences.
Includes brake and clutch lever.
Anodized aluminum is bright and the machining is brilliantly finished.
Made in Canada.
Additional Lever and Selector Colors are available by Special order. Email Us for details.
*Please note: If fitting to 2017 and later models, adjustment of the clutch switch trigger may be necessary to maintain correct auto-blipper function. Again, adjustment is NOT mandatory and should only be done if QS/Blip function is not correct after this lever is installed.
**Please also note: The brake lever does not include the barrel and push rod assembly. You must re-use the barrel and push rod assembly from your stock brake lever. Pazzo includes a push pin to assist in removal of the stock barrel and push rod. This Youtube Video by Pazzo explains how to remove the stock barrel and push rod.
***RS660 and '21 and later RSV4 Owners Owners Please Note: At full left steering lock, contact between the lever and inner front fairing can occur with the front fairing right spoiler. All aftermarket brake levers will have some amount of interference with this troublesome trim piece. This YouTube video (showing the RS660) and this YouTube video (showing the RSV4) illustrate the interference. Some owners have elected to remove the trim piece or cut a notch in it (as seen in this before/after photo) to provide the necssary clearance.