OEM Moto Guzzi Tire Pressure Monitor Set - 2S002002 (ex AF1-2D000687)
Complete fitment list at bottom of this page.
This kit is standard on the V100 Mandello S
Indicates tire pressure on the instrumentation panel.
Kit includes a TPMS ECU, and two replacement tire valve core (TPMS) pressure sensors.
Instruction manual 1 in .pdf format
Instruction manual 2 in .pdf format
*Please note: The tires must be removed to install these pressure sensor valve cores.
**Please note: While the ECU in this kit is plug and play, the TPMS sensors have to be calibrated by your dealer. If you prefer, you can have AF1 Racing pre-calibrate the sensors before shipping to you so then all you will have to do is install the valve cores and plug in the ECU.
***Please note: In order to successfully learn the sensors to the module via PADS (the Piaggio Diagnostic Compter), a slow bleeding of air must be performed while in learning mode. Air each tire up to 35-40psi. Do not remove valve cores. Slowly deflate each tire at a rate of around 5-10 psi per 30 seconds.