Ladybird Universal Brake/Clutch Reservoir Bracket - MD-LADYBIRD-BRACKET

Previous productOEM Aprilia Brake/Clutch Re...

Next productOEM Aprilia Bolt M8x20 - A...

Ladybird Universal Brake/Clutch Reservoir Bracket - MD-LADYBIRD-BRACKET A simple stainless steel bend-as-you-need to bracket to allow universal mounting of brake and/or clutch reservoirs

Availability: 1 In stock -- Ready to Ship Now!

SKU: MD-LADYBIRD-BRACKET

$18.99 (USD)

Qty:

Ladybird Universal Brake/Clutch Reservoir Bracket - MD-LADYBIRD-BRACKET

A simple stainless steel bend-as-you-need bracket to allow universal mounting of brake and/or clutch reservoirs

While we're not really fans of these kind of reservoir bracket (the Rizoma CT450's hold their shape better, are typically lower for more fairing clearance, and jiggle less), this bracket is the simplest and fastest way to fit a brake or clutch reservoir when the stock bracket no longer works.

Made from bendable 304 stainless steel. Approximately 4 inches long with an M6 bolt hole on each side (one side is threaded). Includes an M6 button head bolt and M6 low profile bolt and washers for easy fitting.

*Critical installation notes:

Use a vice or soft pliers to bend the Ladybird bracket
Use a clip-on bar or other tube as a bending point to create a nice radius (*Not using a bar to bend might crease or crack the bracket)
DO NOT BEND this bracket while it is attached to master cylinder. Master cylinder mount holes are notoriously shallow and have few threads of enagement. You will cause severe damage to your master cylinder if you attempt to bend this bracket while it is bolted to the master cylinder.