HP Corse SPS 350 Titanium High Mount Full System - APTUSPS350T-AB+APTUS-CE For Tuareg *See detailed fitment list*
SKU: HP-APTUSPS350T-AB-APTUS-CE
HP Corse SPS 350 Titanium High Mount Full System - APTUSPS350T-AB+APTUS-CE
Includes all required installation hardware.
No catalytic converter
Arrow version installation instructions at the link below (process for HP Corse is the same):
Installation instructions in .pdf format
The UpMap T800 Module or ECU reflash is strongly recommended with this product.
Additional details:
- SPS 350 Titanium Silencer
- Header Pipes are made from Stainless Steel
- Octagonal-shaped body 350 mm long
- Titanium casing 0.8 mm thick
- Molded octagonal bottom
- High quality sound-absorbing material
- Removable db-killer
- Titanium hangar bracket manually TIG welded
- Stainless Steel heat shield
- Leak-proof rivets
- HP Corse Laser engraved logo
- Weight 2800 gr (titanium type without db killer and link-pipe)
- Euro 5 Type-approval
*Please note: For reasons that simply cannot be imagined, HP Corse does not retain their "removable" baffle with a set screw or C-clamp, but rather spot welds it in place as seen in this image. This spot weld is shown as the two red circles. You have to pry off this cover then remove the 4mm allen bolts (green dots in the image) beneath them before you can remove the baffles.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.