HP Corse SP-1 Rally Black Ceramic Titanium Low Mount Full System - APTUSP1350C-AB-APTUS-CD See Product Note

Previous productHP Corse SP-1 Black Titaniu...

Next productHP Corse SP-1 Rally Titaniu...

HP Corse SP-1 Rally Black Ceramic Titanium Low Mount Full System - APTUSP1350C-AB-APTUS-CD For Tuareg *See detailed fitment list*

Availability: Expected to arrive at our warehouse in late May if ordered today

SKU: HP-APTUSP1350C-AB-APTUS-CD

$1,149.99 (USD)

Qty:

HP Corse SP-1 Rally Black Ceramic Titanium Low Mount Full System - APTUSP1350C-AB-APTUS-CD

Includes all required installation hardware.

No catalytic converter

Arrow version installation instructions at the link below (process for HP Corse is the same):

Installation instructions in .pdf format

The UpMap T800 Module or ECU reflash is strongly recommended with this product.

Additional details:

SP-1 Black Ceramic Coated Titanium Silencer
Header Pipes are Stainless Steel
Oval-shaped 350 mm long
Titanium casing 0.8 mm thick
Molded oval bottoms
High quality sound-absorbing material
Removable db-killer
Titanium bracket manually TIG welded
Carbon fiber heat shield
Leak-proof rivets
HP Corse Laser engraved logo
Weight 3.5 lbs (without db-killer)

*Please note: For reasons that simply cannot be imagined, HP Corse does not retain their "removable" baffle with a set screw or C-clamp, but rather spot welds it in place as seen in this image. This spot weld is seen as a recessed dimple. You will have to drill out this dimple to remove the baffle.

**Please note: This system includes a rear turn signal heat deflector. This deflector must be installed or the RH rear turn signal will melt.

FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.

Products specifications