Hepco & Becker Rear AluRack
Complete fitment list at bottom of this page.
This kit consists of three large parts and the required hardware to assemble them:
- The rear plate which measures 340mm wide by 250mm deep
- The RH Grab Rail
- The LH Grab Rail
We're not sure why Hepco & Becker offer this kit. It's fundamentally identical to the Easyrack except that it has a less versatile non-folding aft vertical support. it's plate is wider than the Easyrack, but if a wider plate is what you're after, the Large-Rack would seem to be a more evident choice. That being said, this AluRack does allow mounting of top boxes and is fairly wide, so it may offer some verstility there. In any case, all Hepco & Becker kits are fantastically well engineered and dead simple to install.
- Recommended load: 5kg (11lbs) into the topcase
- No additional adapters needed for mounting a Hepco&Becker Topcase
- This rear rack can be used with either the OEM Moto Guzzi Side Case Kit 2S002168 or the Hepco & Becker C-Bow's
Installation instructions in .pdf format
The following top cases can be used with this rack: