Zoek
Filters
Close
Evotech Italy Frame Sliders, Black for '13-'15 RSV4 Factory, and '11-'20 Tuono V4 (all variants)
Beschikbaarheid:: Niet op voorraad - op nalevering en wordt één keer verzonden op voorraad (3-4 Weeks).
Artikelnummer voorraad referentie: EVI-STDA-007Black
16 109,37 ₽

Evotech Italy Frame Sliders, Black

For '13-'15 RSV4 Factory, and '11-'20 Tuono V4 (all variants)

*Note: These sliders come with "0" position mount bushings, which means they will fit only the above listed models.

These Evotech Italy anti-shock frame sliders have been designed and manufactured with the aim to absorb impact in the event of a fall. This means that the impact is absorbed by the slider, rather than affecting directly the frame. In the event of a fall, the slider is pushed towards a calibrated spacer with a growing diameter. This produces a slider's deformation thus lowering the energy caused by the impact.

Tests carried out in both laboratory and street conditions showed a significant decrease in the stress transmitted to the frame compared to the common sliders.

The slider is made of a plastic material mix which includes fibreglass. It combines high impact absorption and abrasion resistance to low friction with the asphalt. In this way the pad slides on the asphalt without excessively consuming itself and without causing dangerous jamming.

The aerodynamic shape of the slider not only gives a more aggressive look to the bike, but also reduces to the minimum the possibility that the slider is locked on if hitting an obstacle.

On the plastic pads is also engraved a graduated scale that in case of a fall will give an indication of the impact strength.

The main body is aircraft grade billet aluminium and finished in a black anodisation for longevity. Its diameter and section are both calibrated to further reduce the stress led to the frame in the event of a fall.

The kit contains two sliders, mounts, and all required hardwware.

Evotech Italy Frame Sliders, Black

For '13-'15 RSV4 Factory, and '11-'20 Tuono V4 (all variants)

*Note: These sliders come with "0" position mount bushings, which means they will fit only the above listed models.

These Evotech Italy anti-shock frame sliders have been designed and manufactured with the aim to absorb impact in the event of a fall. This means that the impact is absorbed by the slider, rather than affecting directly the frame. In the event of a fall, the slider is pushed towards a calibrated spacer with a growing diameter. This produces a slider's deformation thus lowering the energy caused by the impact.

Tests carried out in both laboratory and street conditions showed a significant decrease in the stress transmitted to the frame compared to the common sliders.

The slider is made of a plastic material mix which includes fibreglass. It combines high impact absorption and abrasion resistance to low friction with the asphalt. In this way the pad slides on the asphalt without excessively consuming itself and without causing dangerous jamming.

The aerodynamic shape of the slider not only gives a more aggressive look to the bike, but also reduces to the minimum the possibility that the slider is locked on if hitting an obstacle.

On the plastic pads is also engraved a graduated scale that in case of a fall will give an indication of the impact strength.

The main body is aircraft grade billet aluminium and finished in a black anodisation for longevity. Its diameter and section are both calibrated to further reduce the stress led to the frame in the event of a fall.

The kit contains two sliders, mounts, and all required hardwware.

Categorie