Search
Filters
Close
Bike Master Aluminum Bar Riser Kit, Black - TR151987 *This kit is not direct fit for any known model* For 7/8" handlebar
Availability: Special Order -- Usually Ships in About 4-6 Weeks
SKU: TR151987
$46.99 (USD)

Bike Master Aluminum Bar Riser Kit, Black - TR151987

*This kit is not direct fit for any known model*

For 7/8" handlebar

The most often requested product for the high bar bikes we offer is "Can we move the bars up?" With the adoption of ABS, Ride-by-Wire CanBus wiring, and ever sleeker and sleeker cable design and routing, that question is nearly impossible to answer.

On any modern bike, any deviation from the stock handlebar position will cause some range of motion or fuction compromise. Other than the most notable issue, the length and routing of the brake line, the length of the control wiring is also optimized for only the stock position. With CAN bus systems being used on nearly every bike we sell, this means that the option to simply cut, splice, and solder in wiring extensions is no longer plausible.

But with that being said, if you're in a desperate situation, and you feel like you have to try something or you'll have to sell your bike, then you might, maybe, be able to get some use out of this shim adjustable bar riser kit.

Risers are billet aluminum and powdercoated black.

The two thin risers are 3/16ths inch

The two thicker risers are 3/8ths inch

Minimum rise is 3/8ths inch (by using the bottom lobe only)

Bike Master Aluminum Bar Riser Kit, Black - TR151987

*This kit is not direct fit for any known model*

For 7/8" handlebar

The most often requested product for the high bar bikes we offer is "Can we move the bars up?" With the adoption of ABS, Ride-by-Wire CanBus wiring, and ever sleeker and sleeker cable design and routing, that question is nearly impossible to answer.

On any modern bike, any deviation from the stock handlebar position will cause some range of motion or fuction compromise. Other than the most notable issue, the length and routing of the brake line, the length of the control wiring is also optimized for only the stock position. With CAN bus systems being used on nearly every bike we sell, this means that the option to simply cut, splice, and solder in wiring extensions is no longer plausible.

But with that being said, if you're in a desperate situation, and you feel like you have to try something or you'll have to sell your bike, then you might, maybe, be able to get some use out of this shim adjustable bar riser kit.

Risers are billet aluminum and powdercoated black.

The two thin risers are 3/16ths inch

The two thicker risers are 3/8ths inch

Minimum rise is 3/8ths inch (by using the bottom lobe only)

Categories