BarkBusters Complete Handguard Set, Jet Series Direct fit heavy duty aluminum braced two point mount handguards for the Aprilia Tuareg
BarkBusters Complete Handguard Set, Jet Series
Direct fit heavy duty aluminum braced two point mount handguards for the Aprilia Tuareg
Installation instructions in .pdf format
Includes a LH and RH set of handguards with all required mounting hardware and frame/brace.
If you are the can-do type and are willing to take up the not insignificant wiring challenge, BarkBusters also offers LED turnsignals that can be mounted onto these handguards.
*Please Note: If you have installed the Aprilia Accessory Heated Grips 2S001864 you will need to shift the kill switch and throttle housing inboard by 7mm to prevent the longer heated grips from binding on the bark buster hardware. A 14mm gap between the brake master cylinder and kill switch (as seen in this photo) is recommended to obtain the needed clearance. The kill switch and throttle housing can be shifted inboard by loosening 2 #2 phillips head screws and a T15 Torx Bolt in the kill switch, and by loosening a T25 Torx Bolt in the throttle housing.