Suchen
Filters
Close
Woodcraft Ignition Switch Elimination Harness For '09-'20 RSV4 (all variants), '19-'20 RSV4 1100 Factory, and '11-'20 Tuono V4 (all variants)
Verfügbarkeit: Nicht mehr verfügbar - Ware wird erwartet und der Vorgang wird weiterverarbeitet, wenn diese wieder an Lager ist (1-2 Weeks).
Artikelnummer: WC43-0740
¥6,745

Woodcraft Ignition Switch Elimination Harness

For:

  • '09-'20 RSV4 (all variants)
  • '19-'20 RSV4 1100 Factory
  • '11-'20 Tuono V4 (all variants)

This Key Switch Eliminator lets you remove your stock ignition switch saving weight. Removing your stock ignition will also free up valuable space for lap timers.

This kit means there is no longer a need for keys.

The best thing about the Key Switch Eliminator is the ability to simply "Plug and Play". It requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.

*Please Note: The Aprilia ECU is equipped with an immobilizer. There is a sensor in the plastic ring that surrounds the keyswitch. The key must be secured in the middle of this ring (see photo below). The ring can optionally be removed from the plastic cover and placed in an alternate location of your choice. The bike will not run without the key in this location unless you have an aftermarket ECU (Microtech or similar).

Installation instructions in .pdf format

Woodcraft Ignition Switch Elimination Harness

For:

  • '09-'20 RSV4 (all variants)
  • '19-'20 RSV4 1100 Factory
  • '11-'20 Tuono V4 (all variants)

This Key Switch Eliminator lets you remove your stock ignition switch saving weight. Removing your stock ignition will also free up valuable space for lap timers.

This kit means there is no longer a need for keys.

The best thing about the Key Switch Eliminator is the ability to simply "Plug and Play". It requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.

*Please Note: The Aprilia ECU is equipped with an immobilizer. There is a sensor in the plastic ring that surrounds the keyswitch. The key must be secured in the middle of this ring (see photo below). The ring can optionally be removed from the plastic cover and placed in an alternate location of your choice. The bike will not run without the key in this location unless you have an aftermarket ECU (Microtech or similar).

Installation instructions in .pdf format

Kategorien