Weiser Technik Ultrabright Extreme LED Turn Signal Upgrade -Pair
Complete fitment list at bottom of this page.
*RSV4 can use these only in the rear. All other listed models can use these in front and rear.
Sold in pairs (enough to do two turn signals, if you want to install on both front and rear, buy quantity 2).
This clever kit allows you to remove your old tech incandescent bulb and reflector and replace with this LED board assembly. (You reuse your stock turn signal lens, stem, and housing).
While installation of these LED inserts is very simple, we strongly recommend first watching the Installation video on Vimeo to familiarize yourself with the design and installation process.
*Please note: These LED inserts are very easy to install, but you MUST have a gentle touch and be able to do very delicate assembly work because the stock turn signal lens is re-used and is extremely easy to break.
**Please also note: The tabs that come off the back of the LED board may need to be angled slightly during installation to allow a smooth re-installation of the turn signal lens. If you find yourself having to apply significant force to the lens to re-install then something is not lining up correctly. Patience is key to getting these fitted correctly.
***Please note: Due to different internal resistance, the blink rate will double.

