SC Project CRT CARBON Slip-On [Open Exit Version] For '17 Spec RSV4, '17 Spec Tuono V4 *See detailed fitment list*
SC Project CARBON Slip-On CRT Exhaust ("High Version")
Complete fitment list at bottom of this page.
Can also be installed on '19-'20 RSV4 1100 Factory but Aftermarket rearsets with low mount bracket or a '17-'18 Spec OEM/stock rear set must also be purchased.
Open Exit Version
This is a "Race Replica” exhaust system, it was used by riders on ART Aprilia's during the 2013 World Championships.
RACE ecu, Race Mapping, or OFT Tablet is mandatory with this product.
This system does not have a removable baffle.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
*Does not fit with Akrapovic headers. Works with Stock headers only.
***Please note: The rearset tab on some pipes will be slightly out of alignment. This is normal. Tighten the through-bolt until the nut is securely attached on the back side, and apply Medium Strength Threadlock Compound. See photo below for illustration of normal mis-alignment.
SC Project products will not be shipped outside North American territories.