Search
Filters
Close
Rizoma Tapered Handlebar, Sold Each
Availability: Please select from the options
SKU: RZMA009
*
$105.00 (USD)

Rizoma Tapered Handlebar

In terms of rise (55mm) and width (740mm) This bar is most similar to the stock Tuono V4 handlebar. It's sweep angle is slightly tighter than the stock Tuono V4 bar (stock bar is 18°). This bar is 23°.
Sold Each
For Aprilia:
  • '02-'05 Tuono
  • '06-'10 Tuono
  • '11-'15 Tuono V4 (all variants)
  • '16-'20 Tuono V4 1100 (all variants)
  • '21 Tuono V4 1100 (all variants)
  • Tuono 660
  • '07-'10 Shiver

For Moto Guzzi:

  • '05-'17 Griso 1100, Griso 1200 8V
If you're looking to install this on a V7 III, you'll also need Rizoma 42mm Bar Riser Kit RZAZ402B, and a lot of patience. (A 60mm kit is also available, but not recommended due to inadequate cable and wire lengths)

Handlebar internal diameter at bar end is 14mm

Sold each, delivered as seen in the photo.

Bar does not allow re-use of stock handlebar weights. To mount bar ends or bar end mirrors to this bar see the products at the links below:

Please note: Installation of this handlebar requires drilling of at least two holes for correct location of the LH and RH switch groups. No template is provided. The LSL Drill Jig is an excellent tool to help you drill perfect holes on the first try, every time.

Rizoma Tapered Handlebar

In terms of rise (55mm) and width (740mm) This bar is most similar to the stock Tuono V4 handlebar. It's sweep angle is slightly tighter than the stock Tuono V4 bar (stock bar is 18°). This bar is 23°.
Sold Each
For Aprilia:
  • '02-'05 Tuono
  • '06-'10 Tuono
  • '11-'15 Tuono V4 (all variants)
  • '16-'20 Tuono V4 1100 (all variants)
  • '21 Tuono V4 1100 (all variants)
  • Tuono 660
  • '07-'10 Shiver

For Moto Guzzi:

  • '05-'17 Griso 1100, Griso 1200 8V
If you're looking to install this on a V7 III, you'll also need Rizoma 42mm Bar Riser Kit RZAZ402B, and a lot of patience. (A 60mm kit is also available, but not recommended due to inadequate cable and wire lengths)

Handlebar internal diameter at bar end is 14mm

Sold each, delivered as seen in the photo.

Bar does not allow re-use of stock handlebar weights. To mount bar ends or bar end mirrors to this bar see the products at the links below:

Please note: Installation of this handlebar requires drilling of at least two holes for correct location of the LH and RH switch groups. No template is provided. The LSL Drill Jig is an excellent tool to help you drill perfect holes on the first try, every time.

Customers who bought this item also bought

Rizoma IRide Turn Signal, Black (sold each)

RZFR160B
Special Order -- Usually Ships in About 6-8 Weeks
$74.00 (USD)

Renthal Grip Glue

PURG101
2 In stock -- Ready to Ship Now!
$8.95 (USD)
Categories