Search
Filters
Close
Rizoma Quantum Bar End Mirror, BLACK Can be used on RH or LH side  Sold each
Availability: Special Order -- Usually Ships in About 6-8 Weeks
SKU: AF1-RZBS211B-RZLP200B
*
$166.00 (USD)

Rizoma Quantum Bar End Mirror, Black

Can be used on RH or LH side

Sold each

For Aprilia:

  • '11-'20 Tuono V4 (all variants)***
  • Tuono 660 ***
  • '09-'20 RSV4 (all variants)*
  • '09-'20 RSV4 (all variants)*
  • '04-'09 RSVR, RSVR Factory
  • '98-'03 Mille, Mille-R
  • '00-'03 Falco

For Moto Guzzi:

  • '05-'17 Griso (all variants)
  • V9 Bobber
  • V9 Roamer
  • V7 Stornello
  • V7 Racer
  • V7 Racer II
  • V7 III Racer
  • V7 Classic
  • V7 Stone
  • V7 Stone II
  • V7 III Stone
  • V7 Special
  • V7 Special II
  • V7 III Special
  • V7 III Anniversario
  • V7 III Rough
  • V7 III Milano
  • V7 III Carbon Dark
  • V7 III Carbon Shine

^correct installation for V7's can be seen here, and here. Note the somewhat excessive gap at the end of the handlebar. This is because the stock V7 handlebar is stepped to allow use with the stock bar end.

For Zero:

  • '15-'20 Zero S
  • '15-'20 SR
  • '15-'20 DS
  • '16-'20 DSR
  • '15-'20 FX
  • '16-'20 FXS
  • '20 SR/F
  • '20 SR/S

^Recommended spacer stacking arrangement for Zeros seen at this link.

Sold complete with mounting hardware kit, this gorgeous Italian made bar end mirror is a much cleaner and minimal way to give your self a rear view.

Sold Each

*This does not fit RS660, because the RS660 has only a 5mm bar end bolt and this kit needs, at minumum, an M6 (6mm diameter) bolt.

**Please note: Can not be used with Rizoma Pro-Guard

*Please Note: RSV4 owners are recommended to use the included combination of hardware seen in the photo below.

***Moto Guzzi Griso and All Aprilia owners (except RSV4) please note: Because of reducing internal diameter inside the handlebar, to install this mirror you must leave the grey hex lug (seen in the photo below) installed. If you wish to remove the grey hex lug, you will have to drill out material from the inside of the handlebar to allow the expansion collet be inserted.








Looking for a Rizoma part? Click the link below to find the part number for any Rizoma part you are interested in and email an inquiry to info@af1racing.com

Rizoma Quantum Bar End Mirror, Black

Can be used on RH or LH side

Sold each

For Aprilia:

  • '11-'20 Tuono V4 (all variants)***
  • Tuono 660 ***
  • '09-'20 RSV4 (all variants)*
  • '09-'20 RSV4 (all variants)*
  • '04-'09 RSVR, RSVR Factory
  • '98-'03 Mille, Mille-R
  • '00-'03 Falco

For Moto Guzzi:

  • '05-'17 Griso (all variants)
  • V9 Bobber
  • V9 Roamer
  • V7 Stornello
  • V7 Racer
  • V7 Racer II
  • V7 III Racer
  • V7 Classic
  • V7 Stone
  • V7 Stone II
  • V7 III Stone
  • V7 Special
  • V7 Special II
  • V7 III Special
  • V7 III Anniversario
  • V7 III Rough
  • V7 III Milano
  • V7 III Carbon Dark
  • V7 III Carbon Shine

^correct installation for V7's can be seen here, and here. Note the somewhat excessive gap at the end of the handlebar. This is because the stock V7 handlebar is stepped to allow use with the stock bar end.

For Zero:

  • '15-'20 Zero S
  • '15-'20 SR
  • '15-'20 DS
  • '16-'20 DSR
  • '15-'20 FX
  • '16-'20 FXS
  • '20 SR/F
  • '20 SR/S

^Recommended spacer stacking arrangement for Zeros seen at this link.

Sold complete with mounting hardware kit, this gorgeous Italian made bar end mirror is a much cleaner and minimal way to give your self a rear view.

Sold Each

*This does not fit RS660, because the RS660 has only a 5mm bar end bolt and this kit needs, at minumum, an M6 (6mm diameter) bolt.

**Please note: Can not be used with Rizoma Pro-Guard

*Please Note: RSV4 owners are recommended to use the included combination of hardware seen in the photo below.

***Moto Guzzi Griso and All Aprilia owners (except RSV4) please note: Because of reducing internal diameter inside the handlebar, to install this mirror you must leave the grey hex lug (seen in the photo below) installed. If you wish to remove the grey hex lug, you will have to drill out material from the inside of the handlebar to allow the expansion collet be inserted.








Looking for a Rizoma part? Click the link below to find the part number for any Rizoma part you are interested in and email an inquiry to info@af1racing.com

Categories