Pazzo Folding Lever Set - Long Includes one brake and one clutch lever For RS660, Tuono 660, RSV4, Tuono V4 *See Detailed Fitment List*
SKU: AF1-PAF99F-xRL-PAV4AF-xRL
- *
Pazzo Folding Lever Set - Long Includes one brake and one clutch lever
Compelte fitment list at bottom of this page.
Approximately the same length as the stock lever.
Includes one brake and one clutch lever
Approximately the same length as the stock lever.
Precise, six-position adjustable, billet aluminum levers with a folding feature, that could prevent breakage in the event of a fall.
Lever portion is available in several different anodized colors.
Additional colors for the adjuster can be special ordered by emailing us
*Please note: If fitting to 2017 and newer models, adjustment of the clutch switch trigger may be necessary to maintain correct auto-blipper function. Again, adjustment is not mandatory and should only be done if QS/Blip function is not correct after this clutch lever is installed.
**Please also note: The brake lever does not include the barrel and push rod assembly. You must re-use the barrel and push rod assembly from your stock brake lever. Pazzo includes a push pin to assist in removal of the stock barrel and push rod. This Youtube Video by Pazzo explains how to remove the stock barrel and push rod.
***RS660 and '21 and later RSV4 Owners Owners Please Note: At full left steering lock, contact between the lever and inner front fairing can occur with the front fairing right spoiler. All aftermarket brake levers will have some amount of interference with this troublesome trim piece. This YouTube video (showing the RS660) and this YouTube video (showing the RSV4) illustrate the interference. Some owners have elected to remove the trim piece or cut a notch in it (as seen in this before/after photo) to provide the necssary clearance.