Search
Filters
Close
Categories
Puig Clear Windscreen for '16-'20 Tuono V4 1100 (all variants)
Availability: Expected to arrive at our warehouse in late May if ordered today
SKU: OF7615W
$129.07 (USD)

Puig Clear Windscreen for '16-'20 Tuono V4 1100 (all variants)

*/**/***Special Fitting notes below

Puig Motoplastic has become the racers screen of choice in the WSBK and MotoGP paddocks. The fit, optics, aerodynamic efficiency, and clever design make this a screen of envy.

Screen measures approximately 66mm (roughly 2.6 inches) taller than stock [top of instrument cluster to top of screen].

*Please note: The revised front fairing of the 2016-2020 Tuono V4 makes it probably the most difficult to remove of all the Tuono series. An excellent step by step write up is availalble on our forum that explains front fairing and windscreen removal. But you have been warned: This is NOT a ten minute job.

**Please also note: Due to the peculiarities of the 2016-2020 Tuono V4 front fairing design, extreme care must be taken to ensure the perpendicular tabs (indicated in red in the photo below) are not broken during installation. Additionally, the screws that go through the perpendicular tabs must not be over tightened (we recommend finger tight plus the weight of a feather)

***Please also note: A gap of 4-5 mm can be visible on this screen when initially installed. we've found that the screens, once installed, will tend to settle in as they are used. This part is molded plastic, after all and is relatively pliable. (See image at bottom of this page).

*
*
*
*