K-Tech DDS Pro Rear Shock For '17-'18 RSV4 RF and '19 RSV4 1100 Factory *Can also be installed on '11-'21 RSV4 base models, but red side linkage plates are required*
K-Tech DDS Pro Rear Shock
- '17-'18 RSV4 RF*
- '19 RSV4 1100 Factory*
*This part is for the above listed models only, because these models run unique red side linkage plates.
Owners of '11-'15 RSV4-R, '16-'20 RSV4-RR, and '21 RSV4 1100 (base models) can only install this shock if they also order the red side linkage plates
The K-Tech DDS ‘Pro’ rear shock has been designed for use at the highest level of racing and developed in major championships around the world. Like all other K-Tech products it has been designed and manufactured in the UK using the latest design software and highest grades of materials.
The DDS ‘Pro’ features compression and rebound damping adjustment, length adjustment and hydraulic spring preload adjustment. It also features K-Tech's unique ByPass Valve adjuster which controls both compression and rebound damping adjustment to assist with chassis control at low velocity shock movement to enhance tyre feel and grip.
The DDS system uses a smaller piston rod which keeps the system more stable over a wider temperature range due to its small displacement. Damping is controlled by a 32mm piston which allows the use of larger shims for improved feel.
- 5 way adjustable
- 32 clicks compression adjustment
- 32 clicks rebound adjustment
- 16 clicks BPV adjustment
- Hydraulic spring preload adjustment
- Length adjustment (total range of 6mm; length fully extended 315mm)
- CNC machined components
- DDS technology
- Potentiometer mounting points
- Wide range of spring rates available
- Used at the highest levels of racing including British Superbike and Isle of Man TT