Suchen
Filters
Close
Moto Guzzi Journey Adjustable Front Brake Lever - 606439M  For MGX 21, Audace 1400, California 1400 Touring, California 1400 Custom, Eldorado 1400 -CLOSEOUT-
Verfügbarkeit: 2 auf Lager
Artikelnummer: APC_606439M-20200103
Alter Preis: RM1,059.40
RM324.12


Moto Guzzi Journey Adjustable Front Brake Lever -2S000791

For:

  • MGX 21
  • Audace 1400
  • California 1400 Touring
  • California 1400 Custom
  • Eldorado 1400

An Official Moto Guzzi accessory, this lever is a bit of a daring departure from typical aftermarket levers. With this lever, Moto Guzzi decided to go for ruggedness over form. The result is a billet lever that has a ball end that is "dipped" in delrin. A unique look for sure, but this may be the most durable lever you can put on a 1400 Guzzi.

Matching Clutch Lever is 606438M

*This part is overstocked, so we are offering it at closeout pricing

***Installation of this aftermarket lever is somewhat more complicated than typical.

The installation procedure for the clutch lever is illustrated below:

Remove Snap Ring from lever pivot:














Grind off pivot as shown:















When pin is removed the pivot will look like this: (note brass spring washer)












Use supplied pin, washer, and nut (seen in first photo) to secure pivot to new lever:

 


Moto Guzzi Journey Adjustable Front Brake Lever -2S000791

For:

  • MGX 21
  • Audace 1400
  • California 1400 Touring
  • California 1400 Custom
  • Eldorado 1400

An Official Moto Guzzi accessory, this lever is a bit of a daring departure from typical aftermarket levers. With this lever, Moto Guzzi decided to go for ruggedness over form. The result is a billet lever that has a ball end that is "dipped" in delrin. A unique look for sure, but this may be the most durable lever you can put on a 1400 Guzzi.

Matching Clutch Lever is 606438M

*This part is overstocked, so we are offering it at closeout pricing

***Installation of this aftermarket lever is somewhat more complicated than typical.

The installation procedure for the clutch lever is illustrated below:

Remove Snap Ring from lever pivot:














Grind off pivot as shown:















When pin is removed the pivot will look like this: (note brass spring washer)












Use supplied pin, washer, and nut (seen in first photo) to secure pivot to new lever:

 

Kategorien