^**Photo above may not show current fork cap design. Matris, being Italian, likes to subtly restyle the cap at least once a year, so the fork cap you get may not be 100% identical to the photo.
Matris F20 Fork Cartridge Kit for '19-'23 V85 TT (all variants)
The Italian made Matris F20K Fork cartridge kit features Compression, Rebound, and spring pre-load adjustment
Each leg features spring pre-load adjustment while Compression and Rebound are adjusted in separate legs (LH leg does compression, RH leg does rebound).
Additional details and features:
- Fork cartridge cylinder is 20 mm diameter and made from aluminum alloy, with lapping and oxidation surface treatment.
- Pumping rod is 12 mm in diameter and is also made from aluminum alloy Al 7075, with lapping and hard oxidation surface treatment.
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, each with its own dedicated shims stack for precise hydraulic flow control.
- Valve sets have been specially designed to prevent cavitation.
- All internal and external Aluminium components are supplied with anodizing surface treatment.
- No modification to the original fork (no cut, no drill) is required for assembly of this fork kit
- This kit allows you to stay on the factory recommended regular maintenance schedule.
Installation instructions are included, but a VERY high level of suspension knowledge is assumed. Factory Service Manual is included as a .pdf download with this product to aid in stock fork disassembly.
Installation instructions in .pdf format.
*Professional installation is absolutely mandatory. To install this kit you have to remove the chrome slider from the fork hub. (Image reference 1, position G in the installation instructions above).