Search
Filters
Close
Hepco & Becker C-Bow Side Case Supports for '11-'20 Tuono V4 (all variants)
Availability: 2 In stock -- Ready to Ship Now!
SKU: MM630.7501
$212.99 (USD)

Hepco & Becker C-Bow Side Case Supports

For '11-'20 Tuono V4* (all variants)

*Can be installed on '16-'20 Tuono V4 1100 Factory, but the passenger pegs must remain installed.

Can be used, without modification, with any Hepco & Becker "C-Bow" series side cases.

Installation instructions can be found at the link below
Tuono V4 C-BOW side case support Instructions in .pdf format.

AF1 Racing's suggested side cases for this part are listed below:

These racks can be used with the Hepco & Becker Rear Rack for Tuono V4.

If you're running an upswept or high mount exhaust, you might want to also purchase theĀ C-Bow 30mm Lifter Brackets to get some space under your bags to prevent possible sooting or overheating of the bag or bag contents.

Please note: This is a No-cut, No-drill kit, You do not have to modify your fairings at all. Please see instruction link above for details.

*Please note: Does not work with R&G Racing Tail Tidy if using stock turn signals. Does not work with Evotech Tail Tidy, if using stock turn signals. Does not work with Puig Tail Tidy, if using stock turn signals. Does not work with Graves Tail Tidy, if using stock turn signals. Does not work with MotoBox Tail Tidy. Does not work with Rizoma Tail Tidy, if using stock turn signals.

Hepco & Becker C-Bow Side Case Supports

For '11-'20 Tuono V4* (all variants)

*Can be installed on '16-'20 Tuono V4 1100 Factory, but the passenger pegs must remain installed.

Can be used, without modification, with any Hepco & Becker "C-Bow" series side cases.

Installation instructions can be found at the link below
Tuono V4 C-BOW side case support Instructions in .pdf format.

AF1 Racing's suggested side cases for this part are listed below:

These racks can be used with the Hepco & Becker Rear Rack for Tuono V4.

If you're running an upswept or high mount exhaust, you might want to also purchase theĀ C-Bow 30mm Lifter Brackets to get some space under your bags to prevent possible sooting or overheating of the bag or bag contents.

Please note: This is a No-cut, No-drill kit, You do not have to modify your fairings at all. Please see instruction link above for details.

*Please note: Does not work with R&G Racing Tail Tidy if using stock turn signals. Does not work with Evotech Tail Tidy, if using stock turn signals. Does not work with Puig Tail Tidy, if using stock turn signals. Does not work with Graves Tail Tidy, if using stock turn signals. Does not work with MotoBox Tail Tidy. Does not work with Rizoma Tail Tidy, if using stock turn signals.

Customers who bought this item also bought
Categories