Forsaken Motorsports Swingarm Linkage for RSV4, Tuono V4 *See detailed fitment list*
Forsaken Motorsports Swingarm Linkage
*Could also be installed on '17 and later RSV4 RF/Factory, but the rear shock spring would have to immediately be changed for at least a +2.
This link keeps the suspension’s rising rate more linear for added traction and a better better power delivery.
The parts are machined in house Forsaken Motorsports Haas VM3 from a billet block of 7075-T6 aluminum.
The link comes fitted with new bearings. The OEM bolts, sleeves and seals are re-used. The kit includes the two rockers and one arm.
This assembly is approximately 35% stiffer than the stock unit which means there will be less flex under load.
*Please note: Due to it's linear rate this linkage kit may require a different (stiffer) spring than the stock suspension components. Valving can also be modified to take advantage of the flatter rising rate.
**This linkage does not allow carrying of passengers. It is a race use only part. This linkage is for single rider application only.
***Please note: The dogbone in this linkage set comes with plastic sleeves in the needle bearings. Push these plastic sleeves out before attempting installation (see photo below):