Extreme Components Matte Twill Carbon Fiber Frame Covers - EC-CA1800
Includes a LH and RH Frame Cover
Complete fitment list at bottom of this page.
This matte twill carbon fiber is flat finish with a satin clear coat (not glossy), and is very similar to Official Aprilia Carbon Fiber.
Extreme Components of Italy did a great job matching these panels to the contours of the stock frame and even left a large opening at the swingarm pivot to allow frame adjustable models access to the swingarm fasteners and position collets and installation of the air ducts.
These frame covers do not bolt on. They are secured by double sided tape, which is not included. We know 3M VHB tape to work well for this sort of application, however, you'll need to use A LOT of it. And your frame will have to be as perfectly clean as possible to promote good adhesion.
Lastly, in addition to the standard warning of carbon fiber where you should expect minor filing, drilling, and tab massaging to be required during installation, you'll also have to remove your air ducts, lower fairings, mid fairings, upper fairings, and even rearsets to install these parts.
This is 100% carbon fiber. Not carbon over fiberglass construction.
Carbon is treated with a thick satin UV transparent layer to slow the fading process caused by prolonged exposure to direct sunlight.