Search
Filters
Close
Crosstrax 1 Inch (25mm) Lowering Offroad Driver Pegs, Silver
Availability: Special Order -- Usually Ships in About 5-7 Business Days
SKU: KD191010C-1613
$149.99 (USD)

Crosstrax 1 Inch (25mm) Lowering Offroad Driver Pegs, Silver for Stock Rearsets

Sold as a LH and RH Pair

Essentially identical to the Crosstrax 1.0 Lowering pegs, except these pegs have a more off-road oriented pyramid textured footpad.

For:

  • RS660
  • Tuono 660
  • '09-'18 RSV4 (all variants)
  • '19-'20 RSV4-RR
  • '16-'20 Tuono V4 1100 (all variants)
  • '11-'15 Tuono V4 (all variants)
  • '98-'03 Mille, Mille-R
  • '02-'05 Tuono
  • '01-'04 Futura
  • '04-'09 RSVR, RSVR Factory
  • '06-'10 Tuono
  • '11-'16 Shiver
  • '18-'19 Shiver 900

These anodized aluminum pegs allow you to lower your footpegs 1 inch versus stock without the need to purchase a complete set of aftermarket rearsets.

For maximum benefit from these pegs we also suggest you buy either of the eccentric toe pieces listed below:

These pegs are for the driver only. These are not passenger pegs.

*Please note: Crosstrax/Knight Design refers to these pegs as "The 1 3/8ths Lowering Pegs" on their website, but the actual measured drop when we installed them was just barely over 1 inch. That is why we call them 1 inch and Crosstrax refers to them as 1 & 3/8ths.

**Please note: Does not fit the following models due to their bulged catalytic converters and or heat shields. 

  • '19-'20 RSV4 1100 Factory
  • '21 RSV4 1100 (all variants)
  • '21 Tuono V4 1100 (all variants)

Crosstrax 1 Inch (25mm) Lowering Offroad Driver Pegs, Silver for Stock Rearsets

Sold as a LH and RH Pair

Essentially identical to the Crosstrax 1.0 Lowering pegs, except these pegs have a more off-road oriented pyramid textured footpad.

For:

  • RS660
  • Tuono 660
  • '09-'18 RSV4 (all variants)
  • '19-'20 RSV4-RR
  • '16-'20 Tuono V4 1100 (all variants)
  • '11-'15 Tuono V4 (all variants)
  • '98-'03 Mille, Mille-R
  • '02-'05 Tuono
  • '01-'04 Futura
  • '04-'09 RSVR, RSVR Factory
  • '06-'10 Tuono
  • '11-'16 Shiver
  • '18-'19 Shiver 900

These anodized aluminum pegs allow you to lower your footpegs 1 inch versus stock without the need to purchase a complete set of aftermarket rearsets.

For maximum benefit from these pegs we also suggest you buy either of the eccentric toe pieces listed below:

These pegs are for the driver only. These are not passenger pegs.

*Please note: Crosstrax/Knight Design refers to these pegs as "The 1 3/8ths Lowering Pegs" on their website, but the actual measured drop when we installed them was just barely over 1 inch. That is why we call them 1 inch and Crosstrax refers to them as 1 & 3/8ths.

**Please note: Does not fit the following models due to their bulged catalytic converters and or heat shields. 

  • '19-'20 RSV4 1100 Factory
  • '21 RSV4 1100 (all variants)
  • '21 Tuono V4 1100 (all variants)

Categories