Search
Filters
Close
CNC Racing Front Brake Reservoir w/Bracket, Carbon Fiber  
Availability: Special Order -- Usually Ships in About 2-3 Weeks
SKU: LOSE801Y
Old price: $159.99 (USD)
$129.99 (USD)

CNC Racing Front Brake Reservoir w/Bracket, Carbon Fiber

Height of reservoir is 45mm. Diameter is 50mm. Volume approximately 170cm3

Yes, you are seeing this right: A carbon fiber Front Brake Reservoir with a choice of two universal brackets and 3 outlet spout angles.

Kit is delivered exactly as seen in the photo above and can be installed by most users in under 20 minutes (spilled brake fluid not withstanding).

As will all such parts, use of Medium Strength Threadlock Compound is required. Excess threadlock must be wiped off and rinsed from the reservoir immediately to prevent cosmetic stains.

**Please note: This reservoir is a "universal type" and is not a "plug and play" complete installation kit. Careful positioning of the reservoir and some manipulation of the bracket will be required in order to achieve a good fit.

CNC Racing Front Brake Reservoir w/Bracket, Carbon Fiber

Height of reservoir is 45mm. Diameter is 50mm. Volume approximately 170cm3

Yes, you are seeing this right: A carbon fiber Front Brake Reservoir with a choice of two universal brackets and 3 outlet spout angles.

Kit is delivered exactly as seen in the photo above and can be installed by most users in under 20 minutes (spilled brake fluid not withstanding).

As will all such parts, use of Medium Strength Threadlock Compound is required. Excess threadlock must be wiped off and rinsed from the reservoir immediately to prevent cosmetic stains.

**Please note: This reservoir is a "universal type" and is not a "plug and play" complete installation kit. Careful positioning of the reservoir and some manipulation of the bracket will be required in order to achieve a good fit.

Categories