Bonamici Standard Shift Rearsets for '11-'16 V4's

Previous productBonamici GP Shift Rearsets ...

Next productCNC Racing Touring Anodized...

Bonamici Standard Shift Rearsets for '11-'16 RSV4 (all variants) and '11-'16 Tuono V4 (all variants)

Availability: Expected to arrive at our warehouse in early May if ordered today

SKU: MD-BON-A004

$549.99 (USD)

Qty:

Bonamici Standard Shift Rearsets for '11-'16 RSV4 (all variants) and '11-'16 Tuono V4 (all variants)

Made in Italy from billet aluminum, these rearsets are probably what everyone's mind would image when it comes to the sort of functional, yet beautiful rearsets that it seems only Italy can produce.

Each pedal rides on ball bearings for the smoothest possible operation.

In addition to a proprietary rear brake return spring design, these rearsets also feature nine adjustable footpeg positions (lowest, most forward setting is equivalent to stock, all others are higher and further back.)

Delivered as seen in the photo above, though Bonamici, as with any Italian vendor is known to subtly cosmetically restyle some element of their rearsets at least once per year.

Spare parts are available.

Allows reuse of rear brake switch and quick shift sensor so all APRC and ABS [if equipped] functions are retained.

‡Important Note: The bolts that secure the rearsets and passenger peg brackets to the frame are coated with a tremendous amount of medium strength threadlock compound by Aprilia. When removing rearset or passenger peg brackets take extreme care and exercise maximum patience when removing these bolts or this can happen (photo link). The best way to avoid stripped or broken rearset bolts is to loosen the bolt by hand until you feel binding and then retighten. Loosen again until binding (bolt will unthread a little futher every time) then retighten. Repeat this process (you will have to take breaks to let the bolt cool) until the bolt comes out.