BarkBuster Hand Guard Mounting Kit & Frame - BHG-105
Complete fitment list at bottom of this page.
*Mounting kit & frame only. Does not include hand guards
Includes a LH and RH mounting kit & frame.
*Please Note: If you have installed the Aprilia Accessory Heated Grips 2S001864 you will need to shift the kill switch and throttle housing inboard by 7mm to prevent the longer heated grips from binding on the bark buster hardware. A 14mm gap between the brake master cylinder and kill switch (as seen in this photo) is recommended to obtain the needed clearance. The kill switch and throttle housing can be shifted inboard by loosening 2 #2 phillips head screws and a T15 Torx Bolt in the kill switch, and by loosening a T25 Torx Bolt in the throttle housing.