Search
Filters
Close
Agostini Rearset Kit, Anodized, For V7 Racer. Can also be fitted to V7 Classic, V7 Stone, and V7 Special. BUT aftermarket exhausts without heat shields must be fitted.
Availability: Please select from the options
SKU: AMV7FRX
*
$449.99 (USD)


Agostini Rearset Kit, Anodized

For V7 Racer.

*Can also be fitted to V7 Classic, V7 Stone, and V7 Special. BUT aftermarket exhausts without heat shields must be fitted.

This Italian made rearset kit features the same peg position as found stock on the '11-'15 V7 Racer rearsets, but is anodized and offers 1 inch of peg height/depth adjustment thanks to a slotted mounting hole.

Installation instructions are not provided, but the rearsets install in the same manner as stock. Detail photos below should provide additional installation assistance.

Matching Black Anodized Passenger Pegs From Agostini are available separately.

Use of Medium Strength Threadlock Compound is mandatory.

Please note that the installation of this rearset kit requires replacement of the shift pedal layshaft, seen in the center of the photo below. 

*Please note: Rear Brake Pedal Pushrod Adjustmet should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values). 


Agostini Rearset Kit, Anodized

For V7 Racer.

*Can also be fitted to V7 Classic, V7 Stone, and V7 Special. BUT aftermarket exhausts without heat shields must be fitted.

This Italian made rearset kit features the same peg position as found stock on the '11-'15 V7 Racer rearsets, but is anodized and offers 1 inch of peg height/depth adjustment thanks to a slotted mounting hole.

Installation instructions are not provided, but the rearsets install in the same manner as stock. Detail photos below should provide additional installation assistance.

Matching Black Anodized Passenger Pegs From Agostini are available separately.

Use of Medium Strength Threadlock Compound is mandatory.

Please note that the installation of this rearset kit requires replacement of the shift pedal layshaft, seen in the center of the photo below. 

*Please note: Rear Brake Pedal Pushrod Adjustmet should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values). 

Categories