OEM Aprilia Front Brake Lever - 2B009813 See Product Notes

Previous productOEM Aprilia Screw M5x16 Cou...

Next productOEM Aprilia Clutch Lever, S...

OEM Aprilia Front Brake Lever - 2B009813 For Tuareg *See detailed fitment list*

Availability: 2 In stock -- Ready to Ship Now!

SKU: 2B009813

$75.27 (USD)

Qty:

OEM Aprilia Front Brake Lever - 2B009813

Delivered as seen in the photo.

***Critical Note: Despite its brilliance in nearly every aspect, the Tuareg's front brake lever design dates to the 1970s. Because of this arcahic part, exceptional care must be taken when installing a new front brake lever:

On the Tuareg, the master cylinder piston return can be adjusted by the slot head fastener (called the Push Rod Adjuster Cup) seen in this image. When replacing the lever you must adjust the lever free play (at the ball end of the lever) to be 3-5mm (1/8th to 3/16th's inch) as illustrated in this image. A safe starting point is to set the Push Rod Adjuster Cup to sit flush with the pivot body as shown in this image. Any time a new front brake lever is installed, hoist the front wheel in the air and spin it to ensure that it both spins freely and stops when the lever is squeezed. If the lever free play is greater than 5mm, turn then slot head in by 1/2 turn increments only. Over tightening the slot head can result in sudden front wheel lock up. A futher complication is that the adjustment may change as heat builds up in the front brake system from riding, or as ambient temperatures increase. For this reason we recommend leaving the ball end adjustment closer to the 5mm specification.