Complete fitment list at bottom of this page.
Can be installed on '21 and later RSV4 1100 (all variants) and '21 and later Tuono V4 1100 (all variants) but there are a couple considerations:
- Use of driver rearset mounted slip-ons is not possible. You must run an exhaust that mounts to the subframe (aka where passenger peg bracket goes)
- The RH side heel guard bolts supplied are too long. You'll have to re-use the stock bolts
- The 2 lowest and most rearward mounting positions are not available due to interference with the heat shield found on the stock exhaust.
Attack Performance's machining and component quality are not mentioned often enough. These Southern California produced rearsets are legitimately as much a dress up item as they are a performance piece. Bright anodizing, well thought out adjustments and attachments, and expertly machined. You are not likely to find a better designed, better built, and more versatile set of rearsets at this price.
Kits feature multi adjustable peg positions, folding toe pieces, and extendable brake pedal, and 4 choices for position mounting of the shift shaft.
Thanks to a cleverly designed shift pedal, these rearsets can be configured for Road or GP shift without changing of any additional parts.
Exhaust hanger bracket is removable.
Installation sheet in .pdf format.
*Owners of 2019 and 2020 RSV4 1100 Factory please note: These rearsets do not fit with the stock Akrapovic exhaust due to the catalytic converter bulge.
**Does not fit any V4 that has been fitted with the Akrapovic Titanium Homologated slip-on
2S001050 due to interference with the catalytic converter bulge.
***Please Note: You may want to purchase a pair of M8 Spacers to prevent possible contact between the rear master cylinder and swingarm.
****Please note: Attack Performance did include a provision for the rear brake switch (see linked .pdf installation sheet above) to ensure compatibility with '17 and later models, but DID NOT include a provision for the installation of a rear brake return spring. We do not offer a mod or any way to incorporate a rear brake spring.
Please note: Rear Brake Pedal Pushrod Adjustment should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values).