Complete LH and RH rearset kit with pedals.
For '17-'18 RSV4 (all variants) these are the best, direct fit V4 rearsets money can buy.
Can also be installed on '17-'18 Tuono 1100 (all variants)
These billet aluminum rearsets are machined from 6082T6 solid bar and plate.
This rearset kit includes a removable exhaust mounting plate. This allows owners running full systems and short or CRT slip-ons to remove the large exhaust bracket if not required.
This Tricolore Edition rearset comes with upgraded peg carrier fasteners, and folding toe pegs.
GP shift is available as an option.
Footpegs are 6 way adjustable in 15mm increments fore and aft and up and down. When adjusted to their lowest position, the pegs are approximately 5mm lower than the stock peg on a RSV4. When fitted to a Tuono, the lowest position is the same as the stock footpeg.
If you select the "Rider Comfort Kit" option, you get peg carriers that are 10mm lower and pegs that are 15mm longer.
The gearlever runs on top quality dual INA bearings with zero end play giving a firm smooth shift. The gearlever tip has an eccentric adjustable end
The brake lever can be rotated 360° in 4 positions and is also movable fore and aft via a retaining slot in the pedal. The brake side has a billet bracket for the brakelight sensor switch, which is crucial to avoid dashboard errors, and loss of rider aid functionality.
The footpegs have a gnurled surface, grippy in dry and wet conditions.
Uniquiely, the kit is held together with grade 5 titanium fasteners.
Installation instructions in .pdf format. (<Generic instructions, Specific instructions provided with each kit)