SC Project CR-T Titanium Slip-On [Open Exit Version] For '17 Spec RSV4, '17 Spec Tuono V4 *See detailed fitment list*
SC Project CR-T Titanium Slip-On ("High Version")
Complete fitment list at bottom of this page.
Open Exit Version
Full titanium silencer with CNC-machined pipes in titanium Conical link pipe has 60mm outlet (exhaust canister has 60mm inlet and 70mm outlet.)
This pipe is virtually identcail to the MV-A18-HT36T sold elsewhere on this site, but is approximatley 15-20mm lower. We've been asked about this so much over the past 4 years that we photographed the pipes side by side in this photo, this photo, and this photo, to show just how identical A18 and A16 pipes are.
Everything to install the exhaust on the bike is included: 1 silencer, 1 link pipe, springs and screws, high temperature stickers
RACE ecu, Race Mapping, or OFT Tablet is mandatory with this product.
This system does not have a removable baffle.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
*Does not fit with Akrapovic headers. Works with Stock headers only.
**Please note: The rearset tab on some pipes will be slightly out of alignment. This is normal. Tighten the through-bolt until the nut is securely attached on the back side, and apply Medium Strength Threadlock Compound. See photo below for illustration of normal mis-alignment.
SC Project products will not be shipped outside North American territories.