RAM Fork Stem Mount with Short Double Socket Arm & Universal X-Grip
This kit consists of a fork stem base, short double socket arm and universal X-Grip® cradle. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 - 33mm (.5” – 1.29”).
- Minimum Width = 1.875" (Minimum Height = 4.25")
- Maximum Width = 3.25" (Minimum Height = 2.25")
- Depth = 0.875"
There is also a Ball Mount with 1.5 inch spacing, if you'd prefer to mount your RAM to a plate.
Smart Phone visible in photo below is not included.
Tuono installation is shown immdeiatley below, RSV4 installation is further down. At the very bottom of the page there are photos that Illustrate assembly sequence.
Tuono Vertical Orientation:
Tuono Horizontal Orientation:
RSV4 Arm Angle:
Kit hardware contents below: (V4 models will use the 14mm compression fitting (second from right in the photo)
Correct stacking sequence for assembly: