OEM Aprilia Rearsets With Pedals -899814 For '11-'12 RSV4-R APRC, RSV4 Factory APRC, and '11-'13 Tuono V4 APRC
OEM Aprilia Rearsets With Pedals -899814
For:
- '11-'12 RSV4-R APRC
- '11-'12 RSV4 Factory APRC
- '11-'13 Tuono V4 APRC
CNC machined from aluminum, these 9 position adjustable rearsets include all hardware needed for mounting, dished bottom pegs with removable black end caps and rubber sleeved toe levers.
Gear pedal and brake pedal position offer precise adjustments from threaded rods with locknuts.
Includes provision for GP shift and standard shift configuration (see photo below).
Allows you to re-use standard heel guards.
Instructions are included, but the installation of these rearsets is time consuming.
Use of medium strength thread lock compound is required.
* Please Note: For use with APRC equipped models ONLY
**Please note: Rear Brake Pedal Pushrod Adjustment should be reset anytime rearsets are fitted. This .pdf excerpt from the Aprilia Service Manual explains the process (Mille shown, all models use same values).
‡Important Note: The bolts that secure the rearsets and passenger peg brackets to the frame are coated with a tremendous amount of medium strength threadlock compound by Aprilia. When removing rearset or passenger peg brackets take extreme care and exercise maximum patience when removing these bolts or this can happen (photo link). The best way to avoid stripped or broken rearset bolts is to loosen the bolt by hand until you feel binding and then retighten. Loosen again until binding (bolt will unthread a little futher every time) then retighten. Repeat this process (you will have to take breaks to let the bolt cool) until the bolt comes out.