K-Tech Fork Seals for Ohlins Forks -Sold as a PAIR (OE-KTKFSS-021)
K-Tech Fork Seals for Ohlins Forks
Sold as a PAIR
These K-Tech fork seals are made by NOK and are a great lower cost, but still top quality, option if you need to replace the seals in your Ohlins forks and your dust seals are re-useable.
- '09-'15 RSV4 Factory (all variants)
- '16-'18 RSV4 RF
- '16-'18 Tuono V4 1100 Factory
- '06-'10 Tuono Factory
- '04-'09 RSVR Factory
- '06-'09 RSVR
- '00.5-'03 Mille-R
- '02-'05 Tuono R, Tuono Racing, Tuono Factory
Fork oil capacity for all Aprilia Equipped with Ohlins forks is 500cc per leg or 85mm of air gap*. (Accurate oil level measurement is only ensured when the slider is perfectly vertical and fully down with fork spring installed. Oil level must be the same in both fork legs.)
Seal dimensions are 43x55x11.5mm
If you do any track riding, or just like to adjust and set up your suspension, you may want to grab the K-Tech Fork Travel Indicator with these seals.
The Ohlins part number for these seals are 04730-01. The Aprilia part number for these seals are AP8123975
*Figure is guideline only: Consult the appropriate Factory Service manual for exact specifications.