Lightech Fork Pre-Load Adjusters For Ohlins Forks, '11-'13 RSV4-R with Sachs forks and '11-'13 Tuono V4 with Sachs Forks
These pre-load adjusters will fit on all Ohlins forks found on the following models: '00.5-'03 Mille-R, '02-'05 Tuono R/Factory, '06-'10 Tuono Factory, '04-'09 RSVR Factory, '06-'09 RSVR, '09-'13 RSV4 Factory (including APRC models)
These anodized aluminum fork pre-load adjusters feature laser etched "Lightech" Logos and not one, but three 1.5mm locking set screws to ensure that the adjuster does not slip once mounted on the fork.
Sold as a pair.
Includes 1.5mm Allen key for installation
Please Note: The use of medium strength threadlock compound is required. (Click here for threadlock compound)
These Fork Pre-Load Adjusters are for the fork cap style seen in the photo below ONLY.