Aprilia Racing*** Superstock Camshaft Kit RSV4. Direct from Aprilia Racing Department. For '09-'13 RSV4-R, RSV4 Factory, and RSV4 APRC
Kit includes four camshafts with cam sprockets.
Installation is carried out exactly as described in the factory service manual. It is the purchaser's responsibility to ensure correct bearing clearances. Correct bearing clearances may require line boring the cylinder heads.*
Stock cams in are:
Intake valve timing : 12°BTDC – 48° ABDC
Intake valve lift: 10.2mm Duration: 240°
Exhaust valve timing: 40° BBDC – 10° ATDC
Exhaust valve lift: 8.1mm Duration 230°
The Aprilia Racing Cams are:
Intake valve timing : 20°BTDC – 69° ABDC
Intake valve lift: 10.7mm Duration: 269°
Exhaust valve timing: 43° BBDC – 13° ATDC
Exhaust valve lift: 8.6mm Duration 236°
*Professional Installation Required.
The increased lift of these camshafts require Aprilia Racing pistons with deeper valve pockets. Piston Kit can be seen at this link: Aprilia Racing Superstock Piston Kit
Due to international currency fluctuation, prices are subject to change without notice.
Please allow 3-5 weeks for delivery. All parts are ordered on an as needed basis.
***This part is for racing and closed circuit use only. It is not subject to any warranty coverage or consideration. All sales are final.