Search
Filters
Close
Categories

CRG Hindsight Lane Split Bar End Mirror, Right - PU064005xx

CRG Hindsight Lane Split Bar End Mirror, Right
Availability: Please select from the options
SKU: PU064005xx
*
$84.99 (USD)

CRG Hindsight Lane Split Bar End Mirror, Right

Sold each. Matching LH Side Mirror sold separately.

The Hindsight 3 inch diameter LS (Lane Split) Bar End Mirror was created by adding the folding /retractable feature to the original Hindsight.

There are two primary benefits of the retracting bar end mirror—added clearance during tight riding conditions, and reduced width for bike storage. Simply pull in the bezel of the mirror to create additional clearance, then fold the bezel back out against its positive stop in the full open position and the sighting of the mirror returns perfectly to its rear vision position. The detent folding mechanism is calibrated to retract should the mirror contact an immovable object, thus allowing forward motion without disruption of steering control. The pivot of the hinge features a ball / spring detent which holds the mirror bezel in the full open or full retracted positions. The pivot also features dust rings that provide for years of maintenance free operation.

CRG uses custom convex glass formed to their own specification to give you the perfect balance between field of vision and image magnification. To reduce glare, the glass has an automotive quality mirror tinting. Rubber mounting helps the glass resist vibration. The lightweight but sturdy construction allows the Hindsight Mirror to be positioned for optimal viewing without concern of movement during high speed runs or excursions over rough roads.

• 6061-T6 Aluminum CNC Machined Billet Construction
• Black Anodized
• All stainless hardware
• Fully modular assembly; all parts are replaceable
• Extension elbow is reversible to allow for either left / right side use.
• Will fit most handlebar/clip-ons with an outer diameter of a 7/8” (requires10mm (3/8”) of bare bar out board of the grip/throttle assembly)

**Please note: Use of this product will require custom fitment, or one of the bar end adapter options below:

*Please note: The only thing that makes a CRG RH or LH is the direction of the top of the bolt in the fold back (circled in green in this photo). According to CRG, the bolt should face up. That being said, if you are brave forged-in-fire wild man (or woman) you can safely run a RH on the LH and vice versa, and we've been doing so without issue for nearly 20 years...

*
*
*
*
Product tags